Helmet parts

Bike helmet replacement parts

Bike helmet spare parts replace a worn pad, an occipital retention system or a visor, to bring back comfort and fit to a helmet that has not taken a knock. Mavic bike helmet replacement parts, from Helmet Padding replacement pads to the Speedcity visor, are chosen by the helmet model named on each product page. 


RecommendedSort By

These product categories might interest you

Bike helmet spare parts: which part to replace?

Mavic bike helmet spare parts are chosen by the part you need to replace: the pad for comfort, the occipital retention system for fit, the visor for a Speedcity helmet. 

The right version of a Mavic helmet part is shown by the helmet name in the "Model" selector on the product page: to replace the flattened pads of a helmet listed as "COMETE ULT II MIPS", the Helmet Padding comes in S, M and L. 

Mavic helmet replacement parts differ by the helmets named on their product page and by their sizes, from one size to a choice of S, M and L. 

PartRoleHelmets in the "Model" selectorSizes
Helmet PaddingPads: comfort and breathabilityCOMETE ULT II MIPS, COMETE ULTIM, COMETE SL MIPS, COSMIC ULTIM II, SPEEDCITY SUMMER, SPEEDCITY WINTER, SPEEDCITY 2, DEEMAX 23, AKSIUM, AKSIUM FIT, CROSSROAD, CROSSTRAIL, JUNIOR; other versionsS, M, L, S/M, M/L or one size depending on the helmet
Helmet Retention SystemOccipital retentionMAVIC RS360, AKSIUM RS, CROSSTRAIL RS, CROSSROAD, JUNIOR, SPEEDCITY; other versionsS/M and L (SPEEDCITY); one size for the others
Helmet VisorVisor, UV1 protectionSPEEDCITY, SPEEDCITY 2; SPEEDCITY screw insert, SPEEDCITY 2 plugsS, M, L; one size for the insert and plugs

 

Replacement helmet pads: Helmet Padding for comfort

Mavic Helmet Padding replacement pads take the place of the worn foam in a Mavic helmet to bring back comfort and breathability, with one version per helmet model and, on some models, several sizes. 

Helmet pads worn by a summer of sweaty rides go flat and sit less well on your forehead. Helmet Padding exists for the Comete SL MIPS road helmet and for the Speedcity and Speedcity 2 urban helmets, with "SPEEDCITY SUMMER" and "SPEEDCITY WINTER" pads for the Speedcity. 

The Helmet Padding also comes in a "CROSSTRAIL" version, in S/M and M/L, named after one of the Mavic MTB helmets for enduro and trail, and in a "DEEMAX 23" version, in S/M and L. 

Occipital retention system: RS360, Aksium RS, Crosstrail RS

The Mavic Helmet Retention System replaces the occipital retention system of a Mavic helmet to extend its life, which Mavic recommends limiting to 5 years from the date of purchase. 

The RS360 retention system is fitted to the Comete Ultimate and Comete SL road bike helmets for precise adjustment; on the Comete Ultimate, it keeps the helmet stable at high speed, on a fast descent. 

The dial of a Mavic retention system turns clockwise to tighten and anticlockwise to loosen, and on some Mavic helmets the retention system also adjusts for height at the back of your head. 

Replacement visor for the Speedcity and Speedcity 2

The Mavic Helmet Visor is the replacement visor for the Speedcity and Speedcity 2 helmets, in sizes S, M and L, with UV1 protection, in clear or smoked versions. 

A helmet visor scratched by daily use blurs your view on a wet commute through town. On the Speedcity, the visor protects you from wind, rain and UV rays in city traffic, and it is designed to be easily replaced. The Helmet Visor page also lists the Speedcity screw insert and the Speedcity 2 visor plugs. 

The Helmet Visor fits the Speedcity and Speedcity 2 among the Mavic urban bike helmets for daily commuting: no version of the Helmet Visor carries the name of the Speedcity 2 CAP. 

Parts of a bike helmet: what you can and cannot replace

A bike helmet is usually made up of a shell, an expanded polystyrene (EPS) liner that absorbs impacts, comfort pads, a retention system and a chin strap. 

On the Mavic helmets named on the product pages, the pads, the occipital retention and the Speedcity visor can be replaced. The shell and the EPS liner, which provide protection and carry some of the Mavic helmet innovations, as well as the chin strap and buckle, are not among the helmet spare parts on mavic.com. A frayed strap or a broken buckle, spotted when you inspect your Mavic helmet after a season of riding, therefore cannot be ordered among these parts. 

The Fit System is listed with the cycling shoe spare parts, and the Kit Bearing with the bike wheel parts such as ratchets. 

A bike helmet that has been through a crash or an impact must be replaced, even with no visible damage, because the expanded polystyrene liner crushes as it absorbs the impact. After an impact, a Mavic helmet should be returned to the manufacturer for inspection, or destroyed and replaced. New pads or a new retention system cannot repair a liner that has taken a knock. Damage from a fall or an impact is excluded from the Mavic warranty. Registering your helmet on mavic.com, however, gives you a 40% discount on a new Mavic helmet if you damage it in a fall.

The helmet lifespan of a Mavic bike helmet is 5 years at most: Mavic recommends not using a helmet for more than 5 years from its date of purchase. The date that counts for the life of a Mavic helmet is the month and year shown on the purchase invoice. New Helmet Padding or a new Helmet Retention System replaces a worn part of a Mavic helmet, without pushing back that 5-year limit. A temperature above 45 °C can damage a Mavic helmet, so never store it in a car or close to a heat source.

Helmet pads are washed by hand, in water with a little soap, then left to dry in the open air, out of direct sunlight, with no solvent. A Mavic helmet should be cleaned with soap and water only: solvents, paints and adhesives can damage it invisibly. A temperature above 45 °C can also damage a Mavic helmet, which rules out drying it on a radiator or in a car. Pads that stay flat after washing are replaced with Helmet Padding, when the product page offers a version named after your helmet.

A compatible part for a Mavic helmet is found in the "Model" selector of each spare part product page, which lists the versions by helmet name and, for some parts, by size. Helmet Padding comes, for example, in one size for the Comete SL MIPS, and the Helmet Retention System for the Speedcity in S/M and L. Some names in the selector of Mavic helmet spare parts are abbreviated: if in doubt, contact Mavic customer service from mavic.com. The size of a Mavic helmet part is shown on the line of the selector that carries the name of your helmet.

Mavic helmet spare parts carry a 2-year warranty: a pad, a retention system or a visor with a defect in material or workmanship is covered. A faulty Mavic helmet part is taken to your nearest authorised Mavic retailer, with the invoice or another proof of purchase. A Mavic part replaced under warranty by the Mavic representative in your country is warranted for a new period. Mavic helmet parts damaged by an impact or a fall are not covered. The third year of warranty and the crash discount apply to registered Mavic helmets; the helmet spare parts themselves stay covered for 2 years. The full terms are on the warranty policy page of mavic.com.