Shoe parts

Cycling shoe spare parts

Cycling shoe spare parts replace a worn or broken dial, shoe plate or stud, so you keep riding in the same cycling shoes. Mavic offers two BOA dial kits, Li2 and L6D, for a BOA replacement on your shoe, as well as Ergo Dial closure kits, shoe plates and studs for MTB shoes. 


RecommendedSort By

These product categories might interest you

Which cycling shoe parts do you need?

The cycling shoe parts you need depend on the part to replace: a BOA kit for a dial, an Ergo Dial kit for a closure, a plate for the cleats, studs for an MTB sole. 

When a crash cracks the dial of your cycling shoe, you change the dial alone and keep the shoe for the rest of the season. The FIT System kit, the BOA FIT System kit and the Shoe Plates extend the life of the repaired shoe. 

The four Mavic shoe spare parts differ by the part they replace and by the versions listed on each product page: lace lengths, dial models or plate types. 

PartType of partVersionsUse on the product page
FIT SystemErgo Dial closure kit20, 28, 30, 35 or 80 cm kitReplace an Ergo Dial closure
BOA FIT SystemBOA® closure kitBOA Li2 kit, L6D BOA kitChange a BOA dial
Shoe PlatesShoe plateDelta plate, Memory Delta plate screw kit, SPD 4-bolt plate, Steel V plateReplace a plate
StudSet of interchangeable studsOne versionMTB shoes, wet or dry terrain

 

BOA dial replacement: Li2 kit or L6D kit?

A BOA dial replacement starts from the original BOA dial on your cycling shoe, Li2 or L6: Mavic sells a BOA Li2 kit and an L6D BOA kit. 

The BOA dial model is given on the product page of several Mavic shoes: an L6 dial on the Cosmic Elite SL road cycling shoes, on the Cosmic BOA SPD and on the Crossmax BOA mountain bike shoe, and two L6 dials on the Cosmic SLR. 

The product pages of the Allroad BOA gravel shoes and of the Cosmic BOA road shoes do not name their dial. For these models, and to confirm which kit replaces an L6 dial, have the reference checked by Mavic customer service or a Mavic retailer before ordering, so your shoes are not left on the shelf with a part that does not fit. 

BOA replacement on a cycling shoe: the steps

A BOA replacement on an L6 dial follows the official BOA guides: open the dial, remove the cartridge with the tool, thread the new lace, then refit the dial. 

The BOA guide for the L6 dial fitted on the tongue, with a TX4 lace, details the last steps: you feed the end of the lace into the top of the dial, out at the bottom right, tie a simple knot at the end of the lace, then engage the bottom of the dial in the bottom of the bayonet. BOA publishes a guide for each dial, fitting and lace: follow the one for your shoe at the workbench, rather than riding at the weekend with a dial that no longer holds. 

BOA laces, presented with the other Mavic shoe innovations such as the soles, have been extensively tested in the field and in demanding environments. On the Mavic shoe product pages, the BOA Fit System is backed by the BOA Lifetime Guarantee. 

Replacement shoe plates and MTB studs

The Mavic Shoe Plates and Stud studs are the two spare sole parts: the plate links the cleat to the shoe, the studs give grip on a mountain bike shoe. 

Shoe Plates: the link between cleat and shoe

The Mavic Shoe Plates are the sole part that takes the cleat bolts: with the sole, the plate links the shoe to the bike for good power transfer. The cleat fixing is given on several Mavic product pages: a 3-bolt road cleat, Look or SPD-SL type, on the Cosmic SLR, and SPD cleats on the Cosmic BOA SPD, built for walking about town between two rides. 

Stud: interchangeable studs for MTB shoes

The Mavic Stud kit is a set of interchangeable studs for mountain bike shoes, for wet or dry terrain. The studs give you grip when you put a foot down or push up a steep bank. The Stud product page lists no compatible shoe: a retailer confirms the fit on your model from the Mavic MTB shoes range. 

The BOA replacement kit for Mavic shoes comes in two versions, the BOA Li2 kit and the L6D BOA kit, to be chosen by the original dial, Li2 or L6. The BOA Li2 kit carries the name of the Li2 dial. The Cosmic Elite SL, Cosmic BOA SPD, Crossmax BOA and Cosmic SLR use L6 dials: for these shoes, confirm the match with the L6D kit with Mavic customer service or a retailer. Do the same for the Cosmic BOA and Allroad BOA, whose product pages do not name the dial. On a shoe with two dials, say which one you need to replace.

A BOA dial on cycling shoes combines a micro-adjustable dial, a light and very strong lace, and low-friction lace guides. When you turn the BOA dial, the lace tightens through the guides and closes the upper around your foot; on an L6 or Li2 dial, pulling the dial releases the lace in one go so you can take the shoe off. BOA makes the system, which Mavic fits to its BOA shoes. The Mavic shoe pages describe a micro-adjustable, precise fit that you can tweak even while riding: you adjust the tension at the foot of a climb without stopping.

A BOA dial on your cycling shoe is covered by the BOA Lifetime Guarantee, which covers dials and laces for the life of the shoe they are fitted to. Claims go through the BOA online tool, which sends a repair kit free of charge. The BOA guarantee excludes sewn or heat-welded lace guides, as well as the sole, the upper and the other worn or damaged parts of the shoe. The 2-year Mavic warranty is separate: it covers defects in material or workmanship in Mavic products, for the original purchaser, from the date of purchase, under the terms of the warranty page on mavic.com.

The BOA Li2 and L6 dials both tighten as you turn them and release in one go when you pull, but only the Li2 also loosens step by step when you turn it back. On an L6 dial, you press to engage, turn to tighten and pull to release the tension. The Li2 adds micro-adjustment in both directions: on a descent, you ease the tension slightly without opening the shoe fully, then tighten again before the next climb. The Li2 and L6 dials belong to the BOA L series, designed for low-cut shoes worn by cyclists, runners and golfers.

Mavic cycling shoe spare parts are listed in the grid of the shoe spare parts page on mavic.com: BOA FIT System and FIT System kits, Shoe Plates and Stud studs. If you are unsure which version suits your shoe, ask a retailer, found through the retailer search on the site, or Mavic customer service, both reached from the footer of mavic.com. A broken BOA dial or lace may also be covered by the BOA Lifetime Guarantee, under which BOA sends the repair kit after a claim made online.