ISM 4D light rim technology
Inter Spoke Milling 4 Dimensions
An exclusive Mavic patented concept, ISM 4D significantly reduces weight and inertia without compromising durability. Quicker accelerations, better handling and more resistance ; the right mix to make the most of any ride. The smooth profile also helps reducing aerodynamic drag
Maxtal aluminum alloy
Light and strong
Exclusive to Mavic, this specific aluminum alloy offers a higher strength to weight ratio than conventional 6106 alloy.
UST tubeless technology
Traction and control
Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats.
Instant Drive 360 freewheel technology
The new Instant Drive 360 freewheel system is super light and efficient. A large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile.
Isopulse lacing design
Optimum energy transfer
The spokes are laced radially on the drive side and crossed 2 on the non drive side to maximise drive side dish, thus providing a better spoke tension balance between left and right flanges.
Fore tapeless tubeless technology
Stiffer and stronger
Instead of being drilled, the lower rim bridge is pushed up on the inside, then threaded to enable the spoke nipples to be directly screwed in it, leaving the upper rim bridge intact.
QRM Auto bearing preload technology
Qualité de Roulements Mavic Auto
Our latest innovation. Those cartridge bearings are of course double sealed with C3 internal clearance. Their preload is automatically adjusted to guarantee a perfect spin with no play on the long run.
SUP welding technology
Stronger and smoother joint
Soudé Usiné Process. After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish.
